If the Internal Battery is broken or worn out, you can replace it with a new one. The faulty battery pack must always be recycled according to local laws and regulations.
1. Unplug the power adapter from the wall socket
2. Unplug the power adapter cord from 15v power socket on the left hand side of the Stockwell
3. If the Stockwell is equipped with a Flip Cover, remove it according to the instructions here
4. Carefully put the Stockwell front down on a flat, clean surface
NOTE: Fully charge the battery before using it for the first time
5. Use a TorX screwdriver (Size T10) to remove the two screws on the battery hatch on the back of the Speaker
6. Open the battery hatch and remove it from the Speaker
7. Pull the battery tab and carefully lift the battery without pulling the cable connecting the battery to the Stockwell
8. Carefully disconnect the battery plug and remove the battery
9. Reverse the process to install the new battery
Caution: Only use authentic Stockwell Battery
Do not pull on the Battery Cable
The Battery Plug is polarity sensitive
